These standards are described for wire rods as per JIS G 3505 and eq. with SAE / AISI and eq. with SNI 0053:2019. These may be used for fine wire, annealed wire, galvanized wire, nail wire, barbed wire, staple wire, rivet wire, etc. |
||||||||
Product range JIS |
: 5.5, 6, 6.4, 7, 8, 9, 9.5, 10, 11, 12, 13, 14, 15, 16 mm ; Tolerance ± 0.40 mm on diameter and out of round 0.64 mm max. |
|||||||
Product range AISI/SAE |
: 4.5 – 22 mm |
|||||||
Controlled cooling |
: Stelmor type |
|||||||
Coil weight |
: 1550 kg - 1950 kg approximately |
|||||||
Coil dimensions |
: ID : 950 mm; OD : 1250 mm approximately |
|||||||
Company Standard as per JIS G 3505 and eq. with SAE/AISI/SNI 0053:2019 |
|
|
||||||
Grade / |
% C |
% Mn |
% P |
% S |
% Si |
UTS (Max) |
Elong |
Typical |
Equivalent |
|
|
max. |
max. |
max. |
N/mm2 |
min. % |
End Use |
SWRM 6/1006 |
0.08 max. |
0.60 max. |
0.040 |
0.040 |
0.15 |
420 |
30 |
Binding wire, Annealed wire |
SWRM 8/1008 |
0.10 max. |
0.60 max. |
0.040 |
0.040 |
0.15 |
440 |
25 |
Telegraph wire, nails |
SWRM 10/1010 |
0.08/0.13 |
0.30/0.60 |
0.040 |
0.040 |
0.15 |
460 |
23 |
Galvanized wire, Barbed wire |
SWRM 12/1012 |
0.10/0.15 |
0.30/0.60 |
0.040 |
0.040 |
0.15 |
510 |
22 |
Nail wire, Staple wire, wire mesh |
SWRM 15/1015 |
0.13/0.18 |
0.30/0.60 |
0.040 |
0.040 |
0.20 |
520 |
21 |
Rivet wire |
SWRM 17/1017 |
0.15/0.20 |
0.30/0.60 |
0.040 |
0.040 |
0.20 |
530 |
21 |
Rivet wire |
SWRM 20/1020 |
0.18/0.23 |
0.30/0.60 |
0.040 |
0.040 |
0.20 |
550 |
21 |
Rivet wire |
SWRM 22/1022 |
0.20/0.25 |
0.30/0.60 |
0.040 |
0.040 |
0.20 |
600 |
20 |
Concrete Reinforcement |
Commercial grade: |
||||||||
Product range : 4.5, 4.7, 4.9, 5.1, 5.2, 5.4, 5.5, 5.65, 6.0,6.2 up to 22mm Coil weight : 1550 kg - 1950 kg approximately Coil dimensions : ID : 950 mm; OD : 1250 mm approximately |
||||||||
1012B |
0.3 max. |
1.50 max. |
0.040 |
0.040 |
1.00 |
- |
- |
Miscellaneous |
SAE Grade |
||||||||
Grade / |
% C |
% Mn |
% P |
% S |
% Si |
UTS (max.) |
Elong |
|
Equivalent |
|
|
max. |
max. |
max. |
N/mm2 |
min. % |
|
1005 / SAE 1005 |
0.06 max |
0.35 max |
0.040 |
0.040 |
0.10 |
400 |
35 |
|
1006 / SAE 1006 |
0.08 max |
0.25 - 0.40 |
0.040 |
0.040 |
0.10 |
420 |
30 |
|
1008/ SAE 1008 |
0.10 max |
0.30 - 0.50 |
0.040 |
0.040 |
0.10 |
440 |
25 |
|
1010 / SAE 1010 |
0.08 – 0.13 |
0.30 – 0.60 |
0.040 |
0.040 |
0.10 |
460 |
23 |
|
1012 / SAE 1012 |
0.10 – 0.15 |
0.30 – 0.60 |
0.040 |
0.040 |
0.10 |
510 |
22 |
|
1015 / SAE 1015 |
0.13 – 0.18 |
0.30 – 0.60 |
0.040 |
0.040 |
0.10 |
520 |
21 |
|
1018 / SAE 1018 |
0.15 – 0.20 |
0.60 – 0.90 |
0.040 |
0.040 |
0.10 |
550 |
21 |
|
1020 / SAE 1020 |
0.18 – 0.23 |
0.30 – 0.60 |
0.040 |
0.040 |
0.10 |
570 |
21 |
|